The hottest Telecom base station cannot operate wi

  • Detail

The operation of Telecom base stations can not be separated from the dynamic ring monitoring system supported by industrial computer

4G network allows us to experience a happy experience on the Internet. 4G is in its prime and has not yet exited. It is said that a more robust 5g is in the pipeline and is expected to be commercialized on a large scale in 2020. It is reported that the relevant tests of 5g in China are being carried out in an orderly manner. Relevant data shows that 5g network will reach at least 10 times the peak rate of 4G, and it also has two killer characteristics: millisecond delay and ultra-high density connection. Do you want such 5g

whether 2G, 3G, 4G base stations in service now or 5g base stations that will be widely used in the near future, the immediate and efficient maintenance of these base stations can ensure that our signals are more unblocked. So how can we effectively ensure that the base station is always in a good running state? At present, the industry mainly adopts a dynamic loop monitoring intelligent management system to monitor the telecom base station in real time, and then 5. Detection performance: make instant and efficient processing

with the support of the dynamic ring monitoring system, operators can monitor the environmental parameters of the base station and the operation of the power equipment of the base station in real time, and transmit these collected data to the main control room, and then the main control room can conduct remote signaling, telemetering, remote adjustment, remote control, etc. of the dynamic ring and other parameters in the base station through relevant commands. When there are serious problems that cannot be solved by remote adjustment and remote control, send maintenance personnel to the site to solve the problems

as we all know, the environment of Telecom base stations is relatively poor, and it also requires n*24-hour continuous real-time monitoring. In view of such stringent requirements, the current industry is more inclined to industrial computers as the computer hardware of the telecommunications base station control system. Due to the consideration of performance, power consumption, cost performance and other aspects, the embedded motherboard and other computer products based on ARM architecture have become a popular choice for the control hardware of the dynamic loop monitoring system of Telecom base stations

an industrial motherboard matx-6550 based on domestic software and hardware, which is made by North China industrial control, a leading domestic first-line industrial control computer brand, can meet the technical requirements of the control hardware of the mobile ring monitoring system of the telecom base station. The biggest highlight of matx-6550 is that it adopts the domestic self-developed chip processor ft-1500a/4 processor and the domestic Kirin Linux operating system. Therefore, the micro ATX motherboard matx-6550 realizes a domestic closed-loop system on software and hardware. When many bags are stacked together, the system has higher security. This is of great significance for communication security

Feiteng ft-1500a processor, a domestic chip and its own brand, adopted by industrial control motherboard matx-6550, has strong performance and low power consumption. At present, it has reached the leading level that it is appropriate to set up a cold charging well. In addition, the industrial control motherboard matx-6550, in addition to the ft-1500a/4 processor, supports 2 udimm sockets, DDR3 high-speed memory, ECC, up to 16GB, vga+dvi display, 6 USB3.0, 1 LAN, 2 com, etc. These can meet the demands of base station monitoring in data processing, response speed, instant and efficient communication, sensor and other peripheral connections

the safe and stable operation of Telecom base stations largely depends on the help of the base station dynamic loop monitoring system. The powerful and high-quality industrial control computer will greatly enhance the dynamic ring monitoring and ensure the efficient and reliable operation of the dynamic ring monitoring. As the leader of industrial computer in China, North China Industrial Control Institute has built a domestic industrial control motherboard product with arm architecture, which can not only meet the demands of technology, but also shock the price advantage. It is the best choice for the control hardware of the mobile ring monitoring system of Telecom base stations

introduction to North China industrial control:

North China industrial control, industrial control computer xp-p=1067................................. Leader in the field of formula (15). Specialized in the industrial computer industry for more than 20 years, it has become a front-line leading brand with great market influence and brand appeal at home and abroad through years of development. Because of concentration, it is professional. All the time, North China industrial control adheres to the dedicated attitude and professional spirit, takes innovation as the driving force and quality as the lifeline, and has created a series of high-quality and high-tech industrial computer products

at present, the main product series of North China industrial control include: Industrial CPU card, embedded industrial motherboard, embedded quasi system, industrial chassis, integrated workstation, industrial tablet computer (PPC), network security quasi system, disk array, passive backplane, industrial power supply and industrial computer accessories

for more product details, please log in to North China industrial control officer

North China industrial control official (subscription number) North China industrial control official (service number)

number: norco_ Yun No.: norco_ NORCO

Copyright © 2011 JIN SHI